Filters & Brake Chopper (Menu Index 3); Filters & Brake Chopper Overview; Filters & Brake Chopper Status (Menu Index 3.1) - Danfoss iC7 Series Application Manual

Application Guide | iC7 Series Industry
Default Value: Parameter Type:
Parameter 2921
Number:
Data Type:
REAL
P 2.4.6 Overmodulation
Enables the modulation index to exceed 1.0.
Default Value: 1 (Enabled)
Parameter 5094
Number:
Data Type: BOOL
The following are the selections for the parameter.
Selection Number Selection Name
0 Disabled
1 Enabled
Filters & Brake Chopper (Menu Index 3)
6.4
Filters & Brake Chopper Overview
6.4.1
This parameter group contains parameters for configuring, monitoring, and controlling the input filters, output filters, brake chopper,
and brake resistors.
Filters & Brake Chopper Status (Menu Index 3.1)
6.4.2
P 3.1.1 Brake Power
Shows the power dissipated in the brake resistor.
Default Value: NA
Parameter 2933
Number:
Data Type:
REAL
P 3.1.2 Average Brake Power
Shows the average power dissipated in the brake resistor, calculated over 120 s.
Default Value: NA
Parameter 2934
Number:
Data Type: REAL
104 | © 2024.05
Range (0.00 — \*)
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Selection Description
Disables the function.
Enables the function.
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Descriptions
kHz
Read/Conditional Write
Selection
–
Read/Write
Range (0.00 — \*)
kW
Read Only
Range (0.00 — \*)
kW
Read Only
AB480436531518en-000601 / 136R0283