Protection (Menu Index 4.5) - Danfoss iC7 Series Application Manual

Application Guide | iC7 Series Industry
P 4.3.4.14 Current Limiter Kp
Set the proportional gain of the current limit controller.
Default Value: 100
Parameter 3193
Number:
Data Type:
REAL
P 4.3.4.15 Current Limiter Ti
Set the integration time of the current limit controller. The value is scaled to % of the nominal setting.
Default Value: 100
Parameter 3194
Number:
Data Type: REAL
6.5.5

Protection (Menu Index 4.5)

P 4.5.1 Missing Phase Start-up Detection
Enables detection of missing motor phase at start-up.
Default Value:
0 (Disabled)
Parameter 6070
Number:
Data Type: UINT
The following are the selections for the parameter.
Selection Number Selection Name
0 Disabled
1 Enabled
P 4.5.2 Missing Motor Phase Response
Select the response to a missing motor phase.
Default Value:
1 (Fault)
Parameter 2348
Number:
Data Type:
UINT
The following are the selections for the parameter.
134 | © 2024.05
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Selection Description
Disables the function.
Enables the function.
Parameter Type:
Unit:
Access Type:
Parameter Descriptions
Range (0 — 500)
%
Read/Write
Range (0 — 500)
%
Read/Write
Selection
–
Read/Write
Selection
–
Read/Write
AB480436531518en-000601 / 136R0283