Danfoss iC7 Series Application Manual page 279

Application Guide | iC7 Series Industry
Parameter 1718
Number:
Data Type: REAL
P 5.8.1.8 Speed Reference Before Ramp
Shows the value of speed reference before the ramp generator.
Default Value: NA
Parameter 6049
Number:
Data Type:
REAL
P 5.8.1.9 Speed Reference After Ramp
Shows the value of the speed reference after the ramp generator.
Default Value: NA
Parameter 6150
Number:
Data Type: REAL
P 5.8.1.10 Final Speed Reference
Shows the value of the speed reference before feeding it to the speed controller.
Default Value: NA
Parameter
6151
Number:
Data Type: REAL
P 5.8.1.11 Control Panel Speed Reference
Shows the value of the speed reference given from the control panel.
Default Value:
NA
Parameter 6153
Number:
Data Type: REAL
P 5.8.1.12 Absolute Output Frequency Output
Select an output terminal for the output frequency scaled between 0 Hz and positive speed limits in Hz.
Default Value: –
Parameter
2300
Number:
Data Type: UINT
© 2024.05
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
AB480436531518en-000601 / 136R0283 |
Parameter Descriptions
Hz
Read/Write
Range (-2000 — 2000)
Hz
Read Only
Range (\* — \*)
Hz
Read Only
Range (\* — \*)
Hz
Read Only
Range (\* — \*)
Hz
Read/Write
Selection
–
Read/Write
279