Danfoss iC7 Series Application Manual page 272

Application Guide | iC7 Series Industry
Table 45: Motor Ctrl. Ready Status Word bit descriptions
Bit Description
7 Grid voltage within limits.
8 Temperature within limits.
9 Valid motor data.
10 Valid control configuration.
P 5.1.3 Motor Regulator Status Word
Shows the current state of the motor regulator status word. The status word indicates if a limit controller is active.
Default Value: NA
Parameter
1715
Number:
Data Type: WORD
Table 46: Motor Regulator Status Word bit descriptions
Bit Description
0 Current limit control active (motoring side).
1 Current limit control active (generator side).
2 Torque limit control active (motoring side).
3 Torque limit control active (generator side).
4 Overvoltage control active.
5 Undervoltage control active.
6 Power limit control active (motoring side).
7 Power limit control active (generator side).
8 Speed limit control active.
9 AC-brake control active.
P 5.1.5 Fault Status Word 1
Shows the fault status word 1.
Default Value:
Parameter Type:
Parameter 6203
Number:
Data Type: DWORD
272 | © 2024.05
(continued)
Parameter Type:
Unit:
Access Type:
Range (\* — \*)
Unit:
Access Type:
Parameter Descriptions
Range (\* — \*)
–
Read Only
–
–
AB480436531518en-000601 / 136R0283