Danfoss iC7 Series Application Manual page 288

Application Guide | iC7 Series Industry
Parameter 1406
Number:
Data Type: UINT
P 6.4.4.3 Auto Reset Time Interval
Set the time interval from when an event happens to when it is automatically reset.
Default Value: 10
Parameter 1407
Number:
Data Type:
REAL
Operational Counters (Menu Index 6.5)
6.7.5
P 6.5.1 Control Unit On Time
Shows the total operating time for the control unit.
Default Value: 0
Parameter
2000
Number:
Data Type: UDINT
P 6.5.2 Power Unit On Time
Shows the total operating time for the power unit. The counter only increments if the DC link is powered.
Default Value:
0
Parameter 2001
Number:
Data Type: UDINT
P 6.5.3 Energy Consumption
Shows the energy consumed.
Default Value: 0
Parameter
2002
Number:
Data Type:
ULINT
P 6.5.4 Ground Faults
Shows the total number of ground faults.
Default Value:
0
288 | © 2024.05
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Parameter Descriptions
–
Read/Write
Range (1 — 600)
s
Read/Write
Range (0 — 4294967295)
h
Read Only
Range (0 — 4294967295)
h
Read Only
Range (0 —
18446744073709600000)
kWh
Read Only
Range (0 — 50000)
AB480436531518en-000601 / 136R0283