Danfoss iC7 Series Application Manual page 172

Application Guide | iC7 Series Industry
Parameter 6059
Number:
Data Type: UINT
The following are the selections for the parameter.
Selection Number Selection Name
0 Source 1
1 Source 2
2 Sum
3 Subtract
4 Divide
5 Multiply
6 Maximum
7 Minimum
Advanced control (Menu Index 5.5.6)
6.6.6.7
6.6.6.7.1 Commands (Menu Index 5.5.6.1)
P 5.5.6.1.1 Advanced Start Input
Select inputs for starting in the forward direction when operating in advanced control.
Default Value: –
Parameter
4722
Number:
Data Type: UINT
P 5.5.6.1.2 Advanced Start Logic
Select the combination logic for the start command of advanced control.
Default Value: 3 (OR)
Parameter 1933
Number:
Data Type:
UINT
The following are the selections for the parameter.
Selection Number Selection Name
0 Source 1
1 Source 2
2 AND
172 | © 2024.05
Unit:
Access Type:
Selection Description
Use value from source 1 only.
Use value from source 2 only.
Add references from source 1 and 2 together.
Subtract source 2 from source 1.
Divide source 1 with source 2.
Multiply source 1 with source 2.
Use highest value of source 1 and source 2.
Use lowest value of source 1 and source 2.
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Selection Description
Use value from source 1 only.
Use value from source 2 only.
Logically AND source 1 and 2.
Parameter Descriptions
–
Read/Write
Selection
–
Read/Write
Selection
–
Read/Write
AB480436531518en-000601 / 136R0283