Danfoss iC7 Series Application Manual page 136

Application Guide | iC7 Series Industry
P 4.5.5 Motor Thermistor Input
Select an input for the motor thermistor feedback.
Default Value: –
Parameter 2839
Number:
Data Type:
UINT
P 4.5.6 Motor Thermistor Response
Select the response to a motor thermistor event.
Default Value: 9 (Fault, ramp to coast)
Parameter 2846
Number:
Data Type: UINT
The following are the selections for the parameter.
Selection Number Selection Name
3 Warning
9 Fault, ramp to coast
10 Fault
P 4.5.7 Motor Temperature Input
Select the input for the motor temperature sensor.
Default Value: –
Parameter
2847
Number:
Data Type: UINT
P 4.5.8 Motor Temperature Warning Level
Set the temperature level for issuing a warning.
Default Value:
120
Parameter 2848
Number:
Data Type: REAL
P 4.5.9 Motor Temperature Fault Level
Set the temperature level for issuing a fault. The response will be ramp down and coast.
Default Value: 150
136 | © 2024.05
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Selection Description
The drive issues a warning.
Issues a fault, ramps down, and coast.
The drive issues a fault and coasts the motor.
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Parameter Descriptions
Selection
–
Read/Write
Selection
–
Read/Write
Selection
–
Read/Write
Range (-300 — 300)
°C
Read/Write
Range (-300 — 300)
AB480436531518en-000601 / 136R0283