Danfoss iC7 Series Application Manual page 187

Application Guide | iC7 Series Industry
Set the duration for a DC braking current injection.
Default Value:
Parameter Type:
Parameter 2267
Number:
Data Type: REAL
P 5.7.2.2 DC-brake Current
Set the DC braking current in % of nominal motor current.
Default Value: Parameter Type:
Parameter
2266
Number:
Data Type: REAL
P 5.7.2.3 DC-brake Speed
Set the speed below which DC braking is activated.
Default Value:
Parameter Type:
Parameter 2268
Number:
Data Type:
REAL
P 5.7.2.4 DC Stop Time
Set the DC stopping injection duration. The value -1 means indefinitely.
Default Value: Parameter Type:
Parameter 2320
Number:
Data Type: REAL
P 5.7.2.5 DC Stop Current
Set the DC stopping current in % of nominal motor current. Applied after the drive has reached standstill.
Default Value: Parameter Type:
Parameter 2321
Number:
Data Type:
REAL
Quick Stop (Menu Index 5.7.3)
6.6.8.4
P 5.7.3.1 Quick Stop Inverse Input
Select an input terminal for activating the Quick Stop Inverse function.
Default Value: –
© 2024.05
Range (0 — 10000)
Unit:
Access Type:
Range (0 — 1000)
Unit:
Access Type:
Range (0 — \*)
Unit:
Access Type:
Range (-1 — 10000)
Unit:
Access Type:
Range (0 — 1000)
Unit:
Access Type:
Parameter Type:
AB480436531518en-000601 / 136R0283 |
Parameter Descriptions
s
Read/Write
%
Read/Write
Hz
Read/Write
s
Read/Write
%
Read/Write
Selection
187