Danfoss iC7 Series Application Manual page 212

Application Guide | iC7 Series Industry
Parameter 1123
Number:
Data Type: REAL
Ramp 4 (Menu Index 5.8.6.5)
6.6.9.7.6
P 5.8.6.5.1 Ramp 4 Type
Select the ramp type.
Default Value: 0 (Linear Ramp)
Parameter 1128
Number:
Data Type: UINT
The following are the selections for the parameter.
Selection Number Selection Name
0 Linear Ramp
1 S-Ramp
P 5.8.6.5.2 Ramp 4 Accel. Time
Set the acceleration time from 0 to nominal motor speed.
Default Value: 5
Parameter 1104
Number:
Data Type:
REAL
P 5.8.6.5.3 Ramp 4 Decel. Time
Set the deceleration time from nominal motor speed to 0.
Default Value:
5
Parameter 1108
Number:
Data Type: REAL
P 5.8.6.5.4 S-Ramp 4 Accel. Increase Time
Set the ramp acceleration increase time for S-ramp.
Default Value:
1
Parameter 1112
Number:
Data Type: REAL
212 | © 2024.05
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Selection Description
Use linear ramp.
Use S-ramp ramp reducing torque changes.
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Descriptions
s
Read/Write
Selection
–
Read/Write
Range (0 — 10000)
s
Read/Write
Range (0 — 10000)
s
Read/Write
Range (0 — 10000)
s
Read/Write
AB480436531518en-000601 / 136R0283