Danfoss iC7 Series Application Manual page 38

Application Guide | iC7 Series Industry
Industry
0.0 rpm 0.0 rpm
Main Menu
Status
Events
Setup & Service
About this Device
Figure 7: Main Menu Screen
Basic navigation techniques
To navigate through and within the main menu, use the navigation buttons of the control panel.
To navigate to different entries of the menu, press the up or down arrows of the control panel.
l
To navigate to a lower level in the menu press the OK button, and to navigate to a higher level press the Back button.
l
Contents of the menu
The main menu has 4 selections
Table 9: Main Menu Contents
Selection
Status
Events
38 | © 2024.05
REM
0.00 A
Function
Returns to Status Screen 1
Access event-related content.
Industry
0.0 rpm 0.0 rpm
Events
Active Events
Event History
Event Simulation
Auto Reset
Figure 8: Events Screen
Active Events
Event History
Event Simulation
Auto Reset
REM
0.00 A
View active events and reset them.
View the history of events.
Simulate an event (see 6.7.4.1 Event Simu-
lation (Menu Index 6.4.3)).
Configure the automatic reset behavior
(see 6.7.4.2 Auto Reset (Menu Index
AB480436531518en-000601 / 136R0283
User Interfaces
6.4.4)).