Danfoss iC7 Series Application Manual page 367

Application Guide | iC7 Series Industry
Table 56: Summary Table
(continued)
Group Numb Display Name
Numb er
er (Deci
(Hex) mal)
0x810 4267 X2 Cable Redundancy
0
0x810 4268 FieldbusStartUp
0
0x810 4269 Network Time Protocol
0
0x810 4280 Controller Not in Run
0
0x810 4281 Interface Configuration
0 Change
0x810 5162 Alternative Control Place
0 due to Fieldbus Timeout
0x81F 4270 No Modbus TCP Connec-
D tion
0x81F 4271 No PROFINET Connection
D
0x81F 4272 No EtherNet/IP Connec-
D tion
0x81F 4273 No EtherCAT Connection
D
© 2024.05
Description
Indicates that physical path from X2 interface
to the controller is missing or wrongly config-
ured.
Internal occurrence to mask away Topolo-
gyMismatch occurrence during startup
Information of Network Time Protocol server.
See detailed info.
Controller not in RUN state.
Interface configuration changed. See detailed
info.
Fieldbus process data timeout caused a
change to the alternative control place.
No Modbus TCP communication is currently
established. This happens before the first
connection is established, or if all connec-
tions have stopped (gracefully or disrup-
tively).
No PROFINET I/O communication is currently
established. This happens before the first
connection is established, or if all connec-
tions have stopped (gracefully or disrup-
tively ).
No EtherNet/IP communication is currently
established. This happens before the first
connection is established, or if all connec-
tions have stopped (gracefully or disrup-
tively).
No EtherCAT communication is currently es-
tablished. This happens during start-up be-
fore the first connection is established, or if
all connections has stopped (gracefully or dis-
ruptively).
Troubleshooting
Type of Event Inverter and
Brake Chopper
Action
I F P Invert
W F er
X
X
X
X
X
X
X
X
X
X
AB480436531518en-000601 / 136R0283 |
Brake
367