Danfoss iC7 Series Application Manual page 237

Application Guide | iC7 Series Industry
P 5.10.3.8 Process Reference 2 Max.
Set the maximum process reference for the input.
Default Value: 10
Parameter 6029
Number:
Data Type:
REAL
P 5.10.3.9 Preset Process Reference Selector
Select the preset reference. The preset reference can be selected as a fixed value or by 3 digital inputs.
Default Value: 1 (Preset 1)
Parameter 6032
Number:
Data Type: UINT
The following are the selections for the parameter.
Selection Number Selection Name
0 Bit Selection
1 Preset 1
2 Preset 2
3 Preset 3
4 Preset 4
5 Preset 5
6 Preset 6
7 Preset 7
8 Preset 8
P 5.10.3.10 Preset Process Ref. Bit 0 Input
Select the digital input used as bit 0 addressing the preset reference.
Default Value: –
Parameter 6034
Number:
Data Type: UINT
P 5.10.3.11 Preset Process Ref. Bit 1 Input
Select the digital input used as bit 1 addressing the preset reference.
Default Value: –
© 2024.05
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Selection Description
Use digital inputs to select the preset reference number.
Use preset 1.
Use preset 2.
Use preset 3.
Use preset 4.
Use preset 5.
Use preset 6.
Use preset 7.
Use preset 8.
Parameter Type:
Unit:
Access Type:
Parameter Type:
AB480436531518en-000601 / 136R0283 |
Parameter Descriptions
Range (-1000000 — 1000000)
CustomProcessUnit
Read/Write
Selection
–
Read/Write
Selection
–
Read/Write
Selection
237