Danfoss iC7 Series Application Manual page 208

Application Guide | iC7 Series Industry
Selection Number Selection Name
0 Linear Ramp
1 S-Ramp
P 5.8.6.2.2 Ramp 1 Accel. Time
Set the acceleration time from 0 to nominal motor speed.
Default Value:
5
Parameter 1101
Number:
Data Type: REAL
P 5.8.6.2.3 Ramp 1 Decel. Time
Set the deceleration time from nominal motor speed to 0.
Default Value: 5
Parameter 1105
Number:
Data Type: REAL
P 5.8.6.2.4 S-Ramp 1 Accel. Increase Time
Set the ramp acceleration increase time for S-ramp.
Default Value: 1
Parameter 1109
Number:
Data Type: REAL
P 5.8.6.2.5 S-Ramp 1 Accel. Decrease Time
Set the ramp acceleration decrease time for S-ramp.
Default Value: 1
Parameter
1113
Number:
Data Type: REAL
P 5.8.6.2.6 S-Ramp 1 Decel. Increase Time
Set the ramp deceleration increase time for S-ramp.
Default Value: 1
Parameter
1117
Number:
Data Type: REAL
208 | © 2024.05
Selection Description
Use linear ramp.
Use S-ramp ramp reducing torque changes.
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Descriptions
Range (0 — 10000)
s
Read/Write
Range (0 — 10000)
s
Read/Write
Range (0 — 10000)
s
Read/Write
Range (0 — 10000)
s
Read/Write
Range (0 — 10000)
s
Read/Write
AB480436531518en-000601 / 136R0283