Danfoss iC7 Series Application Manual page 343

Application Guide | iC7 Series Industry
Parameter 7081
Number:
Data Type: BOOL
The following are the selections for the parameter.
Selection Number Selection Name
0 Disabled
1 Enabled
P 10.3.2.3.2 Diagnostic Warning
Enables diagnostic warning. When disabled the device will not send any PROFINET diagnosis message with severity "Maintenance
required" when a warning is present on device.
Default Value: 1 (Enabled)
Parameter 7083
Number:
Data Type: BOOL
The following are the selections for the parameter.
Selection Number Selection Name
0 Disabled
1 Enabled
6.11.3.3 Modbus TCP (Menu Index 10.3.3)
Configuration (Menu Index 10.3.3.2)
6.11.3.3.1
P 10.3.3.2.1 Persistent Storage
Select if persistent storage is active for Modbus writes.
Default Value: 0 (Disabled)
Parameter 7061
Number:
Data Type:
BOOL
The following are the selections for the parameter.
Selection Number Selection Name
0 Disabled
1 Enabled
© 2024.05
Unit:
Access Type:
Selection Description
Disables the function.
Enables the function.
Parameter Type:
Unit:
Access Type:
Selection Description
Disables the function.
Enables the function.
Parameter Type:
Unit:
Access Type:
Selection Description
Modbus writings are not written to persistent storage.
Modbus writings are written to persistent storage.
AB480436531518en-000601 / 136R0283 |
Parameter Descriptions
–
Read/Write
Selection
–
Read/Write
Selection
–
Read/Write
343