Danfoss iC7 Series Application Manual page 209

Application Guide | iC7 Series Industry
P 5.8.6.2.7 S-Ramp 1 Decel. Decrease Time
Set the ramp deceleration decrease time for S-ramp.
Default Value: 1
Parameter
1121
Number:
Data Type: REAL
6.6.9.7.4 Ramp 2 (Menu Index 5.8.6.3)
P 5.8.6.3.1 Ramp 2 Type
Select the ramp type.
Default Value: 0 (Linear Ramp)
Parameter
1126
Number:
Data Type: UINT
The following are the selections for the parameter.
Selection Number Selection Name
0 Linear Ramp
1 S-Ramp
P 5.8.6.3.2 Ramp 2 Accel. Time
Set the acceleration time from 0 to nominal motor speed.
Default Value:
5
Parameter 1106
Number:
Data Type: REAL
P 5.8.6.3.3 Ramp 2 Decel. Time
Set the deceleration time from nominal motor speed to 0.
Default Value: 5
Parameter 1102
Number:
Data Type: REAL
P 5.8.6.3.4 S-Ramp 2 Accel. Increase Time
Set the ramp acceleration increase time for S-ramp.
Default Value: 1
© 2024.05
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Selection Description
Use linear ramp.
Use S-ramp ramp reducing torque changes.
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
AB480436531518en-000601 / 136R0283 |
Parameter Descriptions
Range (0 — 10000)
s
Read/Write
Selection
–
Read/Write
Range (0 — 10000)
s
Read/Write
Range (0 — 10000)
s
Read/Write
Range (0 — 10000)
209