Danfoss iC7 Series Application Manual page 210

Application Guide | iC7 Series Industry
Parameter 1110
Number:
Data Type: REAL
P 5.8.6.3.5 S-Ramp 2 Accel. Decrease Time
Set the ramp acceleration decrease time for S-ramp.
Default Value: 1
Parameter
1114
Number:
Data Type: REAL
P 5.8.6.3.6 S-Ramp 2 Decel. Increase Time
Set the ramp deceleration increase time for S-ramp.
Default Value: 1
Parameter
1118
Number:
Data Type: REAL
P 5.8.6.3.7 S-Ramp 2 Decel. Decrease Time
Set the ramp deceleration decrease time for S-ramp.
Default Value: 1
Parameter 1122
Number:
Data Type:
REAL
6.6.9.7.5 Ramp 3 (Menu Index 5.8.6.4)
P 5.8.6.4.1 Ramp 3 Type
Select the ramp type.
Default Value: 0 (Linear Ramp)
Parameter 1127
Number:
Data Type:
UINT
The following are the selections for the parameter.
Selection Number Selection Name
0 Linear Ramp
1 S-Ramp
210 | © 2024.05
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Selection Description
Use linear ramp.
Use S-ramp ramp reducing torque changes.
Parameter Descriptions
s
Read/Write
Range (0 — 10000)
s
Read/Write
Range (0 — 10000)
s
Read/Write
Range (0 — 10000)
s
Read/Write
Selection
–
Read/Write
AB480436531518en-000601 / 136R0283