Danfoss iC7 Series Application Manual page 174

Application Guide | iC7 Series Industry
Parameter 4723
Number:
Data Type: UINT
P 5.5.6.1.6 Advanced Stop Inverse Logic
Select the combination logic for the stop command of advanced control.
Default Value: 0 (Source 1)
Parameter
1935
Number:
Data Type: UINT
The following are the selections for the parameter.
Selection Number Selection Name
0 Source 1
1 Source 2
2 AND
3 OR
4 NAND
5 NOR
6 XOR
7 XNOR
P 5.5.6.1.7 Advanced Coast Inverse Input
Select inputs for the coast when operating in advanced control. False means the drive is coasted.
Default Value: –
Parameter 4724
Number:
Data Type:
UINT
P 5.5.6.1.8 Advanced Coast Inverse Logic
Select the combination logic for the inverted coast command of advanced control.
Default Value:
0 (Source 1)
Parameter 1936
Number:
Data Type:
UINT
The following are the selections for the parameter.
174 | © 2024.05
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Selection Description
Use value from source 1 only.
Use value from source 2 only.
Logically AND source 1 and 2.
Logically OR source 1 and 2.
Logically NAND source 1 and 2.
Logically NOR source 1 and 2.
Logically XOR source 1 and 2.
Logically XNOR source 1 and 2.
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Descriptions
–
Read/Write
Selection
–
Read/Write
Selection
–
Read/Write
Selection
–
Read/Write
AB480436531518en-000601 / 136R0283