Danfoss iC7 Series Application Manual page 207

Application Guide | iC7 Series Industry
Default Value: 0 (Ramp 1)
Parameter 1100
Number:
Data Type:
UINT
The following are the selections for the parameter.
Selection Number Selection Name
4 Bit Selection
0 Ramp 1
1 Ramp 2
2 Ramp 3
3 Ramp 4
5 Variable Ramp.
P 5.8.6.1.2 Ramp Selection Bit 0 Input
Select the digital input used as bit 0 addressing the speed ramp.
Default Value: –
Parameter 1130
Number:
Data Type: UINT
P 5.8.6.1.3 Ramp Selection Bit 1 Input
Select the digital input used as bit 1 addressing the speed ramp.
Default Value: –
Parameter 1131
Number:
Data Type: UINT
Ramp 1 (Menu Index 5.8.6.2)
6.6.9.7.3
P 5.8.6.2.1 Ramp 1 Type
Select the ramp type.
Default Value: 0 (Linear Ramp)
Parameter 1125
Number:
Data Type: UINT
The following are the selections for the parameter.
© 2024.05
Parameter Type:
Unit:
Access Type:
Selection Description
Use digital inputs to select ramp.
Use ramp 1.
Use ramp 2.
Use ramp 3.
Use ramp 4.
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
AB480436531518en-000601 / 136R0283 |
Parameter Descriptions
Selection
–
Read/Write
Selection
–
Read/Write
Selection
–
Read/Write
Selection
–
Read/Write
207