Danfoss iC7 Series Application Manual page 189

Application Guide | iC7 Series Industry
P 5.7.4.4 AC-brake Current
Set the maximum allowed motor current in % of nominal motor current when AC brake is enabled.
Default Value: 100
Parameter 4057
Number:
Data Type:
REAL
Speed Control (Menu Index 5.8)
6.6.9
Speed Control Overview
6.6.9.1
Parameter group 5.8 Speed Controlcontains the settings and the readout values related to the speed controller.
© 2024.05
Parameter Type:
Unit:
Access Type:
AB480436531518en-000601 / 136R0283 |
Parameter Descriptions
Range (0 — 150)
%
Read/Write
189