Danfoss iC7 Series Application Manual page 164

Application Guide | iC7 Series Industry
Data Type: UINT
The following are the selections for the parameter.
Selection Number Selection Name
1 Local reference
2 Fieldbus reference
3 Reference 1 input
4 Reference 2 input
5 Preset reference
9 Logic Reference
Fieldbus control (Menu Index 5.5.4)
6.6.6.5
References (Menu Index 5.5.4.1)
6.6.6.5.1
P 5.5.4.1.1 Fieldbus Speed Reference Source
Select the speed reference sources for when the drive operates in fieldbus control. Select 2 sources to combine them into 1 reference
value.
Default Value: [2,0]
Parameter
1914
Number:
Data Type: UINT
The following are the selections for the parameter.
Selection Number Selection Name
0 None
2 Fieldbus reference
3 Reference 1 input
4 Reference 2 input
5 Preset reference
9 Logic Reference
P 5.5.4.1.2 Fieldbus Speed Reference Logic
Select how to form the speed reference out of the 2 inputs when operating in fieldbus control.
Default Value:
0 (Source 1)
Parameter 1911
Number:
164 | © 2024.05
Access Type:
Selection Description
Use local reference from the control panel.
Use reference from the fieldbus.
Use the reference from I/O reference 1.
Use the reference from I/O reference 2.
Use reference from the preset reference.
Use reference from Logic.
Parameter Type:
Unit:
Access Type:
Selection Description
No source selected equals a 0 value.
Use reference from the fieldbus.
Use the reference from I/O reference 1.
Use the reference from I/O reference 2.
Use reference from the preset reference.
Use reference from Logic.
Parameter Type:
Unit:
Parameter Descriptions
Read/Write
Selection
–
Read/Write
Selection
–
AB480436531518en-000601 / 136R0283