Fvc+ Settings (Menu Index 4.3.3) - Danfoss iC7 Series Application Manual

Application Guide | iC7 Series Industry
Set the U/f curve frequency point 3.
Default Value:
30
Parameter 2613
Number:
Data Type: REAL
P 4.3.2.11 Frequency Point 4
Set the U/f curve frequency point 4.
Default Value: 40
Parameter
2614
Number:
Data Type: REAL
P 4.3.2.12 Frequency Point 5
Set the U/f curve frequency point 5.
Default Value:
50
Parameter 2615
Number:
Data Type:
REAL

FVC+ Settings (Menu Index 4.3.3)

6.5.4.4
P 4.3.3.1 Continuous Rs Estimation
Enables Rs estimation while running, to compensate for changing operating conditions.
Default Value: 1 (Enabled)
Parameter 428
Number:
Data Type: BOOL
The following are the selections for the parameter.
Selection Number Selection Name
0 Disabled
1 Enabled
P 4.3.3.2 Current Controller Kp
Set the scaling of the current controller nominal proportional gain.
Default Value:
100
© 2024.05
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Selection Description
Disables the function.
Enables the function.
Parameter Type:
AB480436531518en-000601 / 136R0283 |
Parameter Descriptions
Range (0 — 2000)
Hz
Read/Write
Range (0 — 2000)
Hz
Read/Write
Range (0 — 2000)
Hz
Read/Write
Selection
–
Read/Write
Range (0 — 100000)
127