Danfoss iC7 Series Application Manual page 265

Application Guide | iC7 Series Industry
Data Type: REAL
P 2.1.14 Actual Relative Output Current Limit
Shows the actual output current limit relative to the nominal motor current.
Default Value:
NA
Parameter 2700
Number:
Data Type: REAL
P 2.1.15 Heat Sink Temperature
Shows the temperature of the power unit heat sink.
Default Value: NA
Parameter
2950
Number:
Data Type: REAL
P 2.1.16 Main Fan Speed
Shows the speed of the main cooling fan.
Default Value:
NA
Parameter 2931
Number:
Data Type:
INT
P 2.1.17 Internal Fan Speed
Shows the speed of the internal cooling fan.
Default Value: NA
Parameter 2926
Number:
Data Type: INT
P 2.1.19 Heat Sink Temperature Output
Select the output indicating if the heat sink temperature is within range.
Default Value: –
Parameter 2312
Number:
Data Type:
UINT
P 2.1.20 Drive DC-link Voltage Output
© 2024.05
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
AB480436531518en-000601 / 136R0283 |
Parameter Descriptions
Read Only
Range (0 — 300)
%
Read Only
Range (-50 — 200)
°C
Read Only
Range (0 — 32767)
rpm
Read Only
Range (0 — 32767)
rpm
Read Only
Selection
–
Read/Write
265