Danfoss iC7 Series Application Manual page 200

Application Guide | iC7 Series Industry
Data Type: REAL
P 5.8.4.4 Speed Reference 1 Min.
Set the minimum value of the reference. It defines the lower point for the scaling of the reference input.
Default Value:
Parameter Type:
Parameter 1725
Number:
Data Type: REAL
P 5.8.4.5 Speed Reference 2 Max.
Set the maximum value of the reference. It defines the upper point for the scaling of the reference input.
Default Value: 100
Parameter
1726
Number:
Data Type: REAL
P 5.8.4.6 Speed Reference 2 Min.
Set the minimum value of the reference. It defines the lower point for the scaling of the reference input.
Default Value:
Parameter Type:
Parameter 1727
Number:
Data Type:
REAL
P 5.8.4.7 Preset Speed Reference Selector
Select the preset reference. The preset reference can be selected as a fixed value or by 3 digital inputs.
Default Value: 1 (Preset 1)
Parameter 702
Number:
Data Type: UINT
The following are the selections for the parameter.
Selection Number Selection Name
0 Bit Selection
1 Preset 1
2 Preset 2
3 Preset 3
4 Preset 4
200 | © 2024.05
Access Type:
Range (-1000 — 1000)
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Range (-1000 — 1000)
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Selection Description
Use digital inputs to select the preset reference number.
Use preset 1.
Use preset 2.
Use preset 3.
Use preset 4.
Parameter Descriptions
Read/Write
Hz
Read/Write
Range (-1000 — 1000)
Hz
Read/Write
Hz
Read/Write
Selection
–
Read/Write
AB480436531518en-000601 / 136R0283