Danfoss iC7 Series Application Manual page 332

Application Guide | iC7 Series Industry
Default Value: 5 [Analog Output]
Unit: -
The following are the selections for the parameter.
Selection Number
0
5
P 9.5.1.2 T31 Terminal Type
Description: Select the type of the terminal. If voltage is selected, the unit is V. If current is selected, the unit is mA.
Default Value: 0 [Off]
Unit: -
The following are the selections for the parameter.
Selection Number
0
1
2
P 9.5.1.3 T31 Minimum Value
Description: Set the voltage or current representing 0% of the signal.
Default Value:
Unit: -
P 9.5.1.4 T31 Maximum Value
Description: Set the voltage or current representing 100% of the signal.
Default Value: 10
Unit: -
6.10.2.3.2 Input T33 (Menu Index 9.5.2)
P 9.5.2.1 T33 Terminal Mode
Description: Select the mode for the terminal.
332 | © 2024.05
Parameter Type: Selection
Data Type: UINT
Selection Name
Inactive
Analog Output
Parameter Type: Selection
Data Type: UINT
Selection Name
Off
Voltage
Current
Parameter Type: Range (0 — 20)
Data Type: REAL
Parameter Type: Range (0 — 20)
Data Type: REAL
Parameter Descriptions
Parameter Number: 2019
Access Type: Read/Write
Selection Description
Configures the terminal as an analog
output.
Parameter Number: 2284
Access Type: Read/Write
Selection Description
Terminal set to voltage mode.
Terminal set to current mode.
Parameter Number: 2283
Access Type: Read/Write
Parameter Number: 2282
Access Type: Read/Write
AB480436531518en-000601 / 136R0283