Danfoss iC7 Series Application Manual page 213

Application Guide | iC7 Series Industry
P 5.8.6.5.5 S-Ramp 4 Accel. Decrease Time
Set the ramp acceleration decrease time for S-ramp.
Default Value: 1
Parameter
1116
Number:
Data Type: REAL
P 5.8.6.5.6 S-Ramp 4 Decel. Increase Time
Set the ramp deceleration increase time for S-ramp.
Default Value: 1
Parameter
1120
Number:
Data Type: REAL
P 5.8.6.5.7 S-Ramp 4 Decel. Decrease Time
Set the ramp deceleration decrease time for S-ramp.
Default Value: 1
Parameter 1124
Number:
Data Type:
REAL
6.6.9.7.7 Variable Ramp (Menu Index 5.8.6.6)
P 5.8.6.6.1 Accel. Time Input
Select the input or a fixed value for adjusting the variable ramp acceleration time.
Default Value: –
Parameter 1132
Number:
Data Type:
UINT
P 5.8.6.6.2 Accel. Time Maximum
Set the maximum of the acceleration time for the variable ramp.
Default Value:
120
Parameter 1134
Number:
Data Type:
REAL
P 5.8.6.6.3 Accel. Time Minimum
Set the minimum of the acceleration time for the variable ramp.
© 2024.05
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
AB480436531518en-000601 / 136R0283 |
Parameter Descriptions
Range (0 — 10000)
s
Read/Write
Range (0 — 10000)
s
Read/Write
Range (0 — 10000)
s
Read/Write
Selection
–
Read/Write
Range (0 — 10000)
s
Read/Write
213