Display Snmp-Agent Statistics - 3Com 5500-EI PWR Reference Manual

View name:ViewDefault
MIB Subtree:iso
Subtree mask:
Storage-type: nonVolatile
View Type:included
View status:active
View name:ViewDefault
MIB Subtree:snmpUsmMIB
Subtree mask:
Storage-type: nonVolatile
View Type:excluded
View status:active
View name:ViewDefault
MIB Subtree:snmpVacmMIB
Subtree mask:
Storage-type: nonVolatile
View Type:excluded
View status:active
View name:ViewDefault
MIB Subtree:snmpModules.18
Subtree mask:
Storage-type: nonVolatile
View Type:excluded
View status:active
The above output information indicates that MIB view ViewDefault includes all MIB objects under the
ISO MIB subtree except snmpUsmMIB, snmpVacmMIB and snmpModules.18.

display snmp-agent statistics

Syntax
display snmp-agent statistics
View
Any view
Parameters
None
Description
Use the display snmp-agent statistics command to display the statistics on SNMP packets.
The statistics are collected from the time when the switch is started, and the statistics will not be cleared
if the SNMP is restarted.
If you execute the command when SNMP agent is not started, the device prompts "SNMP Agent
disabled".
1-5