Rep 10.1 Ela Hou - Fuser Assembly - Xerox WorkCentre M20 Service Manual

REP 10.1 ELA HOU - Fuser Assembly

Parts List on PL 10.15
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
WARNING
Do not touch the fuser while it is hot.
CAUTION
Before performing this procedure, refer to General Disassembly Precautions, GP 10.
NOTE: If necessary, refer to GP 20 for the acronym list and cross reference lists of more com-
monly recognised part names.
NOTE: The M20F, 4118 and 2218 procedures are the same. The M20F is shown in Figure 1,
Figure 2 and Figure 3.
1. Open the ELA HOU - side cover assembly, PL 8.10 Item 1.
NOTE: For clarity, the ELA HOU - side cover assembly is shown removed from the machine in
Figure 1, Figure 2 and Figure 3.
WorkCentre M20, 4118, FaxCentre 2218 Family
2. Remove the cover sheet connector, Figure 1.
Figure 1 Cover sheet connector removal
December 2006
4-49
1
Remove 1 screw, then
the cover sheet connec-
tor.
Repairs and Adjustments
REP 10.1