Marking Unit
•
Figure 8
and
Figure
9, marking unit enclosure. Check for continuity of less than 10 Ohms
between the enclosure and the machine base. To improve continuity, disconnect the ter-
minals, clean the contact faces and re-assemble.
Figure 8 Marking unit enclosure ground
ColorQube® 9303 Family
Ground contact
February 2013
6-27
Figure 9 Marking unit machine ground
•
Figure
10, upper carriage. Check for continuity of less than 10 Ohms between the upper
carriage and the machine base. To improve continuity, disconnect the terminals, clean the
contact faces and re-install.
Ground contact
General Procedures/Information
GP 7