Rep 7.8 Exit Tray Assembly (4265) - Xerox WorkCentre 4150 Service Manual

REP 7.8 Exit Tray Assembly (4265)

Parts List on PL 28.10
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Power off the machine. Disconnect the power cord.
2. Remove the Exit Tray Assembly (Figure
1
Remove the two
plastic covers.
3
Remove Exit Tray
Assembly.
Figure 1 Removing the Exit Tray Assembly
Replacement
1. Reinstallation is the reverse of the Removal procedure.
WorkCentre WorkCentre 4150/4250/42604150/4250/4260WorkCentre 4150/
WARNING
1).
2
Remove the two mounting
screws.
January 2016
4-125
Repairs and Adjustments
REP 7.8