Delta AS Series Programming Manual page 263

A S S er i es Pr o gr am m ing Ma n ua l
Instruction code
SET
Device DX
D
Data type
D
Symbol
Explanation
When the instruction SET is driven, the specified device is set to ON. It does not matter if the SET instruction is still driven,
the specified device stays ON. You can set the specified device to OFF with the RST instruction.
Example
_5
1. Contact B of X0.0 is loaded, contact A of Y0.0 is connected in series, and Y0.1 stays ON.
2. When X0.0 is OFF, and Y0.0 is ON, Y0.1 is ON. Even if the operation result changes, Y0.1 still stays ON.
5 - 6
Operand
DY X Y
 

D ： Specified device
D
M SM S
  
Function
Keeping the device on
T C HC D
