Delta AS Series Programming Manual page 293

AS Ser ies Pro gra mm in g M anu al
Example
Take the FLD＝ instruction for example. When the value in D0 is equal to that in D2, Y0.0 is ON.
Additional remarks
1.
If the value in S
is OFF, SM is ON, and the error code in SR0 is 16#2013.
2.
If the floating-point value in S
may occur and the result of the "FLD=" instruciton may not be dependable. Use instructions "FLD<" and" FAND>"
or "FLD>" and "FAND<" instead when the floating-point value in S
_6
6 - 1 4
or S exceeds the range of values that can be represented by floating-point numbers, the contact
1 2
or S is from external input, or from ISPSoft, chances are a minor value difference
1 2
or S is from external input, or from ISPSoft.
1 2