Hydraulic End Limiter Adjustment After Wheel Alignment - PREVOST H3-41 Maintenance Manual

steer. Refer to section 16 "Suspension" for
additional information.
16.1.7 Hydraulic End Limiter Adjustment After
Wheel Alignment
NOTE
Before steering limiter readjustment, verify
vehicle wheel alignment and ensure that oil
level is checked and that air bleeding is done.
A setting of the steering limitation is necessary if
or when:
a) A new or repaired steering gearbox is fitted or
b) New screws (20 and 128) were fitted to the
automatically adjusting steering limitation or
c)
Alterations to or adjustments of the front axle
were carried out.
Find the end limiter adjustment procedure in
Maintenance Information MI20-12 available
on Prevost Technical Publications site.
PA1621 Maintenance Manual All Series | Section revised June 2019
SECTION 14: STEERING
31