Passenger Seats; Rotating Seats; Removing Fixed Seats - PREVOST H3-41 Maintenance Manual

9.9 PASSENGER SEATS

The vehicle can be equipped with different seat
models and installed in a variety of seating
arrangements:
1. For coaches, standard seating arrangement
includes two card tables, which can be
folded and removed, and pivoting seats
ahead of each card table. Each pair of seats
is built on a welded steel frame fastened to
the side wall and on a track-mounted
pedestal.
2. The "V.I.P." seat model is an optional seat.
"V.I.P." seats are mounted on one row of
paired seats built on a common frame on
one side of the vehicle, and a row of single
seats on the other side of the vehicle with an
off-center aisle. Each "V.I.P." seat has its
own set of armrests.
Each seat has an easily removable bottom
cushion. Upholstery is clipped on the cushion
frame for cleaning or replacement. To remove
the fabric, simply unclip from the frame. The
standard seats have three armrests. The aisle
and center armrests can be folded up and down
manually, while the window armrest is fixed.
9.9.1

Rotating Seats

1. Loosen completely the threaded-stud knob
under the seat on the aisle side (Figure 87).
FIGURE 87: LOOSEN THE KNOB
2. Pull the seat toward the aisle to unlock the
rotation (Figure 88).
FIGURE 88: PULL TO UNLOCK THE ROTATION
3. Rotate the seats until it stops (Figure 89, A)
and push back toward the window to lock
rotation (Figure 89, B).
FIGURE 89: FINAL POSITION
4. Fasten the threaded-stud knob under the
seat on the aisle side.
9.9.2

Removing Fixed Seats

NOTE
Seats on one row are not interchangeable with
seats of the other row.
To remove fixed seats, proceed as follows:
1. Remove 1 nut holding each seat bottom
cushion from under the front part of the seat
frame.
2. Lift front part of cushions and remove
cushions.
PA1621 Maintenance Manual All Series | Revised Sept 2019
SECTION 18b: X3 SERIES BODY
93