Install locks in four locations and tighten screws
to a torque value of:
55-65 lb-ft (75-88 Nm)
FIGURE 52: ANCHOR BOLTS INSTALLATION
Plug the electrical connectors and lock it with the
connector cover.
FIGURE 53: ELECTRICAL CONNECTION
SECTION 23A: ACCESSORIES - H3 SERIES
Attach the protective wire.
FIGURE 54: PROTECTIVE WIRE INSTALLATION
16. WHEEL CHAIR LIFT CASSETTE
DISMOUNTING
Detach the protective wire. Unlock the connect-
ors. Unplug the electrical connectors.
FIGURE 55: ELECTRICAL DISCONNECTION
PA1621 Maintenance Manual All Series | Jan 2020
37