SECTION 04 : EXHAUST AND AFTERTREATMENT
Upper
Assembling
Position the upper clamps above the upper
•
emboss and the lower clamps below the
lower emboss of the catalytic converter.
Lower
Upper
Using the lines made earlier, line up the
•
lower and upper clamps with regard to the
emboss of the converter and afterward, line
up the lines made earlier on the clamps with
18
PA1621 Maintenance Manual All Series | Section 04 revised Feb 2019
CLAMP
CLAMP
CLAMP
regard to the clamp supports on the catalytic
converter.
Lower
Upper
Lower
Upper
Before tightening the parts, make sure that
•
the catalytic converter lower support is well