Installation - PREVOST H3-41 Maintenance Manual

SECTION 16 : SUSPENSION
FIGURE 8: SWAY BAR
NOTE
Sway bar bushings are slit to ease their
removal.
3.4.2

Installation

1. Loosely install the sway bar.
2. Tighten the eight bushing brackets nuts
according to Torque Table 1 under heading
Torque Specifications.
3. Tighten sway bar link upper nuts and lower
nuts according to Torque Table 1 under
heading Torque Specifications.
4. Install a cotter pin on each nut and bend.
20 PA1621 Maintenance Manual All Series | Section revised October 2018
16028