3. Deploy the tow truck stinger arm,
placing the axle fork holders under the
tow eye pads (Figure 32).
4. Lift the front end of the vehicle high
enough to allow installation of tow cans
or blocks. Place the tow cans or blocks
perfectly centered underneath each
front wheel (Figure 33).
5. With precaution, lower the front of the
vehicle
2.2.2
Second Lift- Front Tow Eye Pads as Lifting Point for Towing
The tow eye pads are fixed to the vehicle chassis, fore of the front axle will be used as front end lifting
points for towing.
Writer:
FL
FIGURE 31: TOW EYE
FIGURE 32
FIGURE 33
MI18-18
Page 15 / 30
<QF7720955 rev 7>