Condenser Compartment Door - PREVOST H3-41 Maintenance Manual

10.5.3 Condenser Compartment Door

FIGURE 142: CONDENSER DOOR
Door Adjustment
•
1. Open the condenser door.
2. Loosen the screws fixing the hinge to hinge
attachment or hinge to door assembly.
Loosening the screws allows the condenser
door assembly to be shifted "LEFT or
RIGHT" and "UP or DOWN" or "IN and
OUT".
3. Adjust condenser door assembly position at
the hinge.
4. Respect the required gap between exterior
finishing panels.
5. Tighten the screws.
6. Check that the door swings freely and closes
properly. It may be necessary to adjust the
door latch to get proper fit and operation.
PA1621 Maintenance Manual All Series | Revised Sept 2019
SECTION 18b: X3 SERIES BODY
137