SECTION 18b: X3 SERIES BODY
6.3 RUST INHIBITOR APPLICATION
Material: Tectyl 185 GW
Safety Rules: Use safety glasses
Supplied air hood
Solvent-resistant rubber gloves
1.0 Wash both wheelhousing mechanical parts before
masking.
2.0 Dry all water sprayed parts. Surface temperature
and dew point must be respected before applying rust
inhibitor.
3.0 Front wheelhousing
a) Mask all rubber joints. Braking system must also be
protected (refer to arrows). Commercial aluminum foil
may be used for masking.
3.1 Front wheelhousing
Front view
14
PA1621 Maintenance Manual All Series | Revised Sept 2019
R1KG21
A water-hose nozzle is recommended. Water may be
hot to reduce washing time especially during winter. If
parts are soiled with oil, clean using R1KG21. Avoid
rubber parts.
Air pressure system may be used, refer to annex 1 for
surface temperature and dew point.