PREVOST H3-41 Maintenance Manual page 700

SECTION 18b: X3 SERIES BODY
4.1 Rear wheelhousing
(Entire braking system)
4.2 Rear wheelhousing
(Entire braking system)
4.3 Rear wheelhousing
5.0 Close off wheelhousing using masking paper.
6.0 Apply TECTYL 185 GW black rust inhibitor onto
wheelhousing mechanical parts.
16
PA1621 Maintenance Manual All Series | Revised Sept 2019
Prevent rust inhibitor from coming in contact with paint.
To close off wheelhousing, a polythene sheet may be
used.
A spray gun and pumping system are required to apply
the rust inhibitor. If the application is done inside a paint
room, select high speed ventilation. Minimum required