SECTION 18b: X3 SERIES BODY
Door release in the event of a latch
•
failure.
If the door release mechanism is damaged or
ceases to function for any reason, the door can
be released by removing these screws on the
fore wall of the rear fender side
140
PA1621 Maintenance Manual All Series | Revised Sept 2019
10.5.5 Fuel Filler Door
Open the fuel filler door.
o
o
Loosen the screws holding the panel to
hinge assembly.
o
Adjust the fuel filler door position according
to
distance
required
finishing panels.
Tighten the nuts.
o
o
Check that the door swings freely and closes
properly.
FIGURE 144: FUEL FILLER DOOR
between
exterior
03046