Removal; Installation; Handheld Priority Microphone; Wireless Microphone - PREVOST H3-41 Maintenance Manual

2.7.1 Removal

1. Place the ignition switch in the ''OFF''
position.
2. Remove the mounting screws at mounting
flange.
3. Disconnect wiring.

2.7.2 Installation

1. Reconnect wiring.
2. Align mounting flange with holes and install
screws.
3. Remove spacer block mounting screws.
4. Insert spacer block and install mounting
screws.
5. Place the ignition switch in the ''ON'' posi-
tion.
2.8

HANDHELD PRIORITY MICROPHONE

FIGURE 12: HANDHELD PRIORITY MICROPHONE
2.9

WIRELESS MICROPHONE

The wireless microphone, receiver and charging
cradle are custom designed units that allow for
wireless communication from anywhere on the
coach. The unit consists of a receiver mounted
in the parcel area directly behind the driver, and
a rechargeable hand-held microphone and
charging unit. Instructions for proper use of the
microphone are included in the ''REI Operating
Manual'' which is provided in the technical
publications box delivered with the vehicle.
SECTION 23b: ACCESSORIES - X3 SERIES
FIGURE 13: WIRELESS MICROPHONE
FIGURE 14: WIRELESS MIC RECEIVER
FIGURE 15: MIC DEVICES
23216
Handheld mic always pairs to channel A and belt
pack mic always pairs to channel B.
To pair microphone to receiver:
Press ACT button for appropriate chan-

nel. ACT indicator on receiver display
will blink to show the receiver is search-
ing for the device to be paired.
Turn device on and face the IR ports

towards the display on the receiver.
 When device has paired, there will be
bars across the top edge of the receiver
display for

2.10 DRIVER'S SPEAKERS

The driver's speakers are mounted one on each
side. This arrangement provides the driver with
PA1621 Maintenance Manual All Series | Revised Jan 2020
the appropriate channel.
11