o
Then, move outside of vehicle and cut
Sika bead to free window while somebody
else hold the window from the inside.
Carefully remove window from frame, ask
o
for help if needed.
Using a razor sharp window scraper,
o
remove from window frame Sika bead and
double-face self-adhesive tape residue.
o
First of all, check Sika 205 cleaner
expiration date.
o
Before applying Sika cleaner, fold "Chix"
cloth twice for proper width.
o
Apply an even coat onto the inside of
window frame and allow drying for 2
minutes (maximum 2 hours).
o
Discard waste according to applicable
environmental regulations, use dangerous
waste containers.
o
Apply masking tape before applying Sika
glue to protect paint and adjacent window
during surface treatment.
For gluing of upper lateral window, refer to
procedure SAV290016.
10.1.9 Front Cap
The fiberglass front cap does not need any
maintenance except painting as needed. It is
held in place with adhesive. If ever it has to be
replaced, make an appointment at a Prevost
service center near you. For minor damages,
refer to paragraph 4 "Common Fiberglass Repair
procedure" and paragraph 5 "Common Painting
Procedure".
PA1621 Maintenance Manual All Series | Revised Sept 2019
SECTION 18b: X3 SERIES BODY
113