9.5.3
Wheelchair Lift access door installation
CAUTION
Install the sliding door onto a suitable lifting device that will allow proper lifting and positioning.
1. Lift and move the sliding door near the opening.
2. Push the door into the opening making sure the positioning lugs are properly inserted into their
housing then pivot the main hinge and secure the door using 4 bolts. Do not fully tighten the bolts yet.
3. Remove the lifting device from the sliding door.
FIGURE 76: WCL SLIDING DOOR INSTALLATION
Adjustment:
1. Adjust sliding door height with reference to the side panels and windows.
2. Slide the top rail into the upper arm then bolt the rail to the structure. Do not fully tighten (Refer to
Figure 77).
PA1621 Maintenance Manual All Series | Revised Sept 2019
SECTION 18b: X3 SERIES BODY
18739
71