PREVOST H3-41 Maintenance Manual page 263

ELECTRICAL CONNECTORS PROTECTION
PROCEDURE NO SAV00002E
Sprayed sealer. It is used for structure ground connections. It prevents
corrosion and ensures maximum contact
Apply this product once installation is finished.
Warning: It is very important to be in a well ventilated area when applying
this product.
Grease-type product.
It is used to facilitate connectors or terminals insertion.
Refer to table for proper use of Nyogel grease.
It is preferable to apply Nyogel into the female part of connector.
Apply this product as the last assembling operation.
"Color Guard" black rubber coating
This product may be applied with a brush.
It is used for structure ground connections or other connections that will most
likely not be disconnected later on.
Apply this product once installation is finished.
Warning : Wear goggles and rubber gloves.
Kent Sealer
.
Refer to table for proper use.
Nyogel Grease
Page 1 of 6
NOVEMBER 2009
REVISION 02
680324
3 Oz. tube: 681095
Container 500g: 683409
684013