PREVOST H3-41 Maintenance Manual page 817

Pneumatic hammer tool (Zip Gun);
•
Razor sharp window scraper or putty
•
knife;
 Open damaged compartment door and
unfasten rub rail fixing bolts. Remove rub
rail.
 Unfasten bolts and disconnect cable if
necessary in order to remove door from
vehicle.
 Preferably install the door onto a work
surface where it can be solidly fixed.
Door Panel replacement
•
 Refer to SAV10054-67.
Baggage Compartment Door Adjustment
•
11. Adjust door to get a 6mm gap at the top.
12. All adjustments are to be made with door
closed, unless specified.
13. Center door in the opening using the
retaining rings.
NOTE
Lateral adjustment is made by adding/
removing retaining rings in these locations.
14. Adjust door position and evenness with
reference to adjacent panels and doors.
NOTE
Vertical adjustment is achieved by moving the
door along the mounting plates slots.
NOTE
Adjustment is made by moving IN or OUT the
lock plates. Adjust one corner at a time.
15. Check handle adjustment. Handle must
remain tight against its plastic housing.
PA1621 Maintenance Manual All Series | Revised Sept 2019
SECTION 18b: X3 SERIES BODY
133