SECTION 18b: X3 SERIES BODY
3.00
A)
Using a pencil, mark the double-face self-adhesive
tape position onto vehicle side.
B)
Apply 1/8 X ½"double-face tape as per marking.
C)
Compress tape
D)
Remove protective film from double-face self-adhesive
tape center section.
3.05
Install 1/8 X ½" foam tape onto middle reinforcement then
compress.
3.10
Apply Sika 252
Onto vehicle surface
–
Cut nozzle as per template
–
Use the guide for the application
–
Bead must be continuous for the whole perimeter.
3.15
A)
Install side panel onto support jig.
86
PA1621 Maintenance Manual All Series | Revised Sept 2019
SECTION 3 SIDE PANEL INSTALLATION
Section A-A Section B-B
Section C-C