Fuel Filler Door; Front Service Compartment - PREVOST H3-41 Maintenance Manual

28. FUEL FILLER DOOR

1. Open the fuel filler door (1, Figure 71).
FIGURE 71: FUEL FILLER DOOR
2. Loosen the screws (3,Figure 71) holding the
panel to hinge (2,Figure 71) assembly.
3. Adjust the fuel filler door position according
to distance required
finishing parts (Figure 52).
4. Tighten the nuts.
5. Check that the door swings freely and closes
properly.

29. FRONT SERVICE COMPARTMENT

Adjustment of the front service compartment
door can be done by following these steps:
1. Open the door.
2. Loosen nut (2, Figure 72).
3. Move part (1, Figure 72), as close as
possible to exterior of coach, so as to have
enough clearance for proper door opening.
4. Tighten nut (2, Figure 72).
5. Loosen nut (3, Figure 72). Hinge allows the
door to be shifted "IN or OUT".
6. Adjust door panel to have the same gap
space as neighboring panels or refer to
Figure 52 for specified gap space. Only if
necessary, use the adjustment allowed by
moving part 1, Figure 72.
1875003D
between exterior
SECTION 18a: H3 SERIES BODY
1
8 ± 2 mm
REF .: 9,5 ± 2 mm
FIGURE 72: DOOR HINGE
7. Loosen screws (5, Figure 73) to allow the
door to be shifted "UP or DOWN".
8. Adjust the door position.
9. Tighten the screws.
10. Check that the door swings freely and closes
properly. It may be necessary to adjust the
door latch to get proper fit and operation.
2
3
4
18194