PREVOST H3-41 Maintenance Manual page 783

1. Clean using anti-silicone (refer to Section A).
2. Apply Sika 205 (refer to Section B).
Section B Sika 205
2. Allow drying
Minimum
Mandatory
time
After 2 hours : Reactivate surface with Sika 205
Before applying any other
product
1.
Apply
CHIX cloth
- For a smooth surface (aluminum, stainless, steel,
fiberglass (gelcoat side), etc.):
- For a porous surface (fiberglass (non gelcoat side),
etc.)
If surface seems dusty, greasy or with finger marks, start
operation again.
PA1621 Maintenance Manual All Series | Revised Sept 2019
SECTION 18b: X3 SERIES BODY
2 minutes
10 minutes
99