PREVOST H3-41 Maintenance Manual page 1001

14.3 VECT
The VECT includes the following components:
Relays 51, 52, 53, 54 and 55
CB301, 20 Amp
Fuses (20A) 302, 303 and 304
Spare fuses: SP1-SP4
FIGURE 45: VECT
FIGURE 46: VECT (CURB SIDE) ON AIR FILTER
BRACKET
SECTION 23A: ACCESSORIES - H3 SERIES
15. WHEEL CHAIR LIFT CASSETTE
INSTALLATION
WARNING
For better stability, keep the platform at
minimum height when moving.
WARNING
Never deploy the platform from enclosure
while standing on the telescopic legs.
WARNING
Telescopic legs were designed to support and
move the platform only, do not use as a work
table.
WARNING
Before moving platform, make sure that floor
is level and free of obstacles.
Install four lifting jacks on the wheel chair lift
cassette.
NOTE
There are two telescopic legs for each
platform side. The proper side is indicated
onto the telescopic leg.
FIGURE 47: JACK INSTALLATION
PA1621 Maintenance Manual All Series | Jan 2020
35